CITI400Pro 400Ws TTL Super-Fast Flash On location (GODOX AD400PRO)
The PIXAPRO CITI400 PRO (Godox Witstro AD400 PRO) is a Revolutionary Battery-Powered Portable TTL Monolight that features a Self-Contained Rechargeable Battery, the High-Speed Studio Powerful Stroboscopic Flash that gives access to TTL Auto-Exposure which quickly provides you with the perfect exposure. It also has Insulated-Gate Bipolar Transistor (IGBT) technology to achieve Short Flash Durations, as well as Fast Recycle Times, which allows you to capture fast motion such as dancing, jumping and even water splashes with ease. With a Built-In Receiver and a variety of different modes from HSS to the Multi-Burst, it is perfect for people who shoot Weddings, Portraits, Events, Fashion, Sports and Advertising. It is especially good for shooting on location due to the flash being easily portable.
9 Stop Range in 1/10 Stop Increments
At 400Ws of power, the CITI Pro can be powered down to 1/256 of its full power in 1/10 stop increments. This is perfect for times when you would like to use a wide aperture for shallow depth-of-field in your photographs. This means shooting small or large subjects is easy and gives flexibility with your lighting.
Super Short Flash Durations
The CITI Pro Series uses IGBT technology to produce short flash durations as quick as 1/10,000 of a second. This feature gives you a sharper image making it great for capturing fast-moving subjects such as water splashes dancing, fitness, sports, events, water splashes and many more possibilities.
Ultra-Fast Recycling Times
The CITI400 Pro has Super Short recycle times ranging from 0.01-0.9s you will not need to worry about a long wait in between shots making sure that those important shots are not missed and reducing overall production time.
Unrivalled Colour Consistency
The CITI Pro Series Feature new re-designed flash tubes with a colour consistency of 5600K +75k.
High-Speed Sync Mode
The CITI PRO features a Hight Speed Sync Mode which allows your flash to sync at higher shutter speeds than normal (with shutter speeds up to 1/8000 of a second) and will allow you to overpower the sun with HSS to make shooting outdoors not an issue, reducing ambient light and getting the shot you want.
Stroboscopic Multi-flash mode
The Stroboscopic Flash feature causes your CITI Pro to fire multiple low-powered flashes in rapid succession it can be set to between 2 and 100 flashes at a frequency between 1 and 100Hz (flashes per second). Combined with a slow shutter speed, you can capture a sequence of images of a moving subject in one exposure such as the one in the photo below.
TTL Compatible
Get the correct exposure automatically to make worrying about settings, not an issue, ideal for those shooting in changing conditions that come from shooting outdoors and to get you to start shooting with little to no fuss. The CITI 400 Pro is compatible with Canon, Nikon, Sony, Olympus, Panasonic, Fujifilm and now Pentax’s TTL Systems, allowing the CITI400 to seamlessly integrate into your current TTL flash system. PiXAPRO triggers are recommended for full control with your unit.
Rear-curtain Sync Mode
The Pixapro CITI Pro supports Front and Rear Curtain Sync, which allows you to achieve interesting motion trail effects such as the ones shown in the above photos.
Battery Capacity
The CITI400 has a new Intelligent 21.6V / 2600mAh Rechargeable Lithium-ion Battery pack giving approximately 390 Full-Powered Shots Per Charge and faster recharge time, perfect to keep you going throughout the shoot without the need for mains power.
USB Type-C Port for Firmware Updates
The CITI400 Pro features a USB Type-C port, which enables you to update the firmware as new technologies become available.
AC Adapter Available
The CITI Pro AC Adapter enables you to run your CITI Pro Flash units using mains power when you are in the studio. Powering the CITI using this accessory will also shorten your recycling times.
Built-In 2.4 GHz Receiver
The CITI400 Pro can be controlled with full TTL, HSS, and remote manual power control with the PIXAPRO PRO ST-IV or ST-III transmitters (To get the most out of your CITI400 we recommend the ST-IV Trigger).
Never miss a key moment with The One System
The One System allows you to communicate with our PIXAPRO flash's built-in receivers and control them all from one trigger. The 2.4GHz trigger system will give you full functionality, compatible with Canon, Nikon, Sony, Fuji, Olympus & Pentax with full control and even high-end cameras from Hasselblad, Leica and PhaseOne with basic control.
The PIXAPRO® CITI400 PRO is a simple, easy-to-use battery-powered unit that offers many features suitable for both amateur and professional photographers. Due to the battery power and TTL feature, it is the perfect light to give crisp sharp images whilst boasting super-fast recycle times and flash duration to capture motion for use in the studio or on location. This compact and lightweight flash are perfect for people who shoot Weddings, Portraits, Events, Fashion, Sports, and Advertising. It is especially good for shooting on location due to the flash being easily portable with automatic TTL metering.
Please Note: PiXAPRO Flash and Triggering Systems are fully compatible with Godox 2.4GHz Triggers, which will allow you to mix both Godox and PiXAPRO Equipment together without issue.
The PIXAPRO CITI400 PRO (Godox Witstro AD400 PRO) is a Revolutionary Battery-Powered Portable TTL Monolight that features a Self-Contained Rechargeable Battery, the High-Speed Studio Powerful Stroboscopic Flash that gives access to TTL Auto-Exposure which quickly provides you with the perfect exposure. It also has Insulated-Gate Bipolar Transistor (IGBT) technology to achieve Short Flash Durations, as well as Fast Recycle Times, which allows you to capture fast motion such as dancing, jumping and even water splashes with ease. With a Built-In Receiver and a variety of different modes from HSS to the Multi-Burst, it is perfect for people who shoot Weddings, Portraits, Events, Fashion, Sports and Advertising. It is especially good for shooting on location due to the flash being easily portable.
9 Stop Range in 1/10 Stop Increments
At 400Ws of power, the CITI Pro can be powered down to 1/256 of its full power in 1/10 stop increments. This is perfect for times when you would like to use a wide aperture for shallow depth-of-field in your photographs. This means shooting small or large subjects is easy and gives flexibility with your lighting.
Super Short Flash Durations
The CITI Pro Series uses IGBT technology to produce short flash durations as quick as 1/10,000 of a second. This feature gives you a sharper image making it great for capturing fast-moving subjects such as water splashes dancing, fitness, sports, events, water splashes and many more possibilities.
Ultra-Fast Recycling Times
The CITI400 Pro has Super Short recycle times ranging from 0.01-0.9s you will not need to worry about a long wait in between shots making sure that those important shots are not missed and reducing overall production time.
Unrivalled Colour Consistency
The CITI Pro Series Feature new re-designed flash tubes with a colour consistency of 5600K +75k.
High-Speed Sync Mode
The CITI PRO features a Hight Speed Sync Mode which allows your flash to sync at higher shutter speeds than normal (with shutter speeds up to 1/8000 of a second) and will allow you to overpower the sun with HSS to make shooting outdoors not an issue, reducing ambient light and getting the shot you want.
Stroboscopic Multi-flash mode
The Stroboscopic Flash feature causes your CITI Pro to fire multiple low-powered flashes in rapid succession it can be set to between 2 and 100 flashes at a frequency between 1 and 100Hz (flashes per second). Combined with a slow shutter speed, you can capture a sequence of images of a moving subject in one exposure such as the one in the photo below.
TTL Compatible
Get the correct exposure automatically to make worrying about settings, not an issue, ideal for those shooting in changing conditions that come from shooting outdoors and to get you to start shooting with little to no fuss. The CITI 400 Pro is compatible with Canon, Nikon, Sony, Olympus, Panasonic, Fujifilm and now Pentax’s TTL Systems, allowing the CITI400 to seamlessly integrate into your current TTL flash system. PiXAPRO triggers are recommended for full control with your unit.
Rear-curtain Sync Mode
The Pixapro CITI Pro supports Front and Rear Curtain Sync, which allows you to achieve interesting motion trail effects such as the ones shown in the above photos.
Battery Capacity
The CITI400 has a new Intelligent 21.6V / 2600mAh Rechargeable Lithium-ion Battery pack giving approximately 390 Full-Powered Shots Per Charge and faster recharge time, perfect to keep you going throughout the shoot without the need for mains power.
USB Type-C Port for Firmware Updates
The CITI400 Pro features a USB Type-C port, which enables you to update the firmware as new technologies become available.
AC Adapter Available
The CITI Pro AC Adapter enables you to run your CITI Pro Flash units using mains power when you are in the studio. Powering the CITI using this accessory will also shorten your recycling times.
Built-In 2.4 GHz Receiver
The CITI400 Pro can be controlled with full TTL, HSS, and remote manual power control with the PIXAPRO PRO ST-IV or ST-III transmitters (To get the most out of your CITI400 we recommend the ST-IV Trigger).
Never miss a key moment with The One System
The One System allows you to communicate with our PIXAPRO flash's built-in receivers and control them all from one trigger. The 2.4GHz trigger system will give you full functionality, compatible with Canon, Nikon, Sony, Fuji, Olympus & Pentax with full control and even high-end cameras from Hasselblad, Leica and PhaseOne with basic control.
The PIXAPRO® CITI400 PRO is a simple, easy-to-use battery-powered unit that offers many features suitable for both amateur and professional photographers. Due to the battery power and TTL feature, it is the perfect light to give crisp sharp images whilst boasting super-fast recycle times and flash duration to capture motion for use in the studio or on location. This compact and lightweight flash are perfect for people who shoot Weddings, Portraits, Events, Fashion, Sports, and Advertising. It is especially good for shooting on location due to the flash being easily portable with automatic TTL metering.
Please Note: PiXAPRO Flash and Triggering Systems are fully compatible with Godox 2.4GHz Triggers, which will allow you to mix both Godox and PiXAPRO Equipment together without issue.
The PIXAPRO CITI400 PRO (Godox Witstro AD400 PRO) is a Revolutionary Battery-Powered Portable TTL Monolight that features a Self-Contained Rechargeable Battery, the High-Speed Studio Powerful Stroboscopic Flash that gives access to TTL Auto-Exposure which quickly provides you with the perfect exposure. It also has Insulated-Gate Bipolar Transistor (IGBT) technology to achieve Short Flash Durations, as well as Fast Recycle Times, which allows you to capture fast motion such as dancing, jumping and even water splashes with ease. With a Built-In Receiver and a variety of different modes from HSS to the Multi-Burst, it is perfect for people who shoot Weddings, Portraits, Events, Fashion, Sports and Advertising. It is especially good for shooting on location due to the flash being easily portable.
9 Stop Range in 1/10 Stop Increments
At 400Ws of power, the CITI Pro can be powered down to 1/256 of its full power in 1/10 stop increments. This is perfect for times when you would like to use a wide aperture for shallow depth-of-field in your photographs. This means shooting small or large subjects is easy and gives flexibility with your lighting.
Super Short Flash Durations
The CITI Pro Series uses IGBT technology to produce short flash durations as quick as 1/10,000 of a second. This feature gives you a sharper image making it great for capturing fast-moving subjects such as water splashes dancing, fitness, sports, events, water splashes and many more possibilities.
Ultra-Fast Recycling Times
The CITI400 Pro has Super Short recycle times ranging from 0.01-0.9s you will not need to worry about a long wait in between shots making sure that those important shots are not missed and reducing overall production time.
Unrivalled Colour Consistency
The CITI Pro Series Feature new re-designed flash tubes with a colour consistency of 5600K +75k.
High-Speed Sync Mode
The CITI PRO features a Hight Speed Sync Mode which allows your flash to sync at higher shutter speeds than normal (with shutter speeds up to 1/8000 of a second) and will allow you to overpower the sun with HSS to make shooting outdoors not an issue, reducing ambient light and getting the shot you want.
Stroboscopic Multi-flash mode
The Stroboscopic Flash feature causes your CITI Pro to fire multiple low-powered flashes in rapid succession it can be set to between 2 and 100 flashes at a frequency between 1 and 100Hz (flashes per second). Combined with a slow shutter speed, you can capture a sequence of images of a moving subject in one exposure such as the one in the photo below.
TTL Compatible
Get the correct exposure automatically to make worrying about settings, not an issue, ideal for those shooting in changing conditions that come from shooting outdoors and to get you to start shooting with little to no fuss. The CITI 400 Pro is compatible with Canon, Nikon, Sony, Olympus, Panasonic, Fujifilm and now Pentax’s TTL Systems, allowing the CITI400 to seamlessly integrate into your current TTL flash system. PiXAPRO triggers are recommended for full control with your unit.
Rear-curtain Sync Mode
The Pixapro CITI Pro supports Front and Rear Curtain Sync, which allows you to achieve interesting motion trail effects such as the ones shown in the above photos.
Battery Capacity
The CITI400 has a new Intelligent 21.6V / 2600mAh Rechargeable Lithium-ion Battery pack giving approximately 390 Full-Powered Shots Per Charge and faster recharge time, perfect to keep you going throughout the shoot without the need for mains power.
USB Type-C Port for Firmware Updates
The CITI400 Pro features a USB Type-C port, which enables you to update the firmware as new technologies become available.
AC Adapter Available
The CITI Pro AC Adapter enables you to run your CITI Pro Flash units using mains power when you are in the studio. Powering the CITI using this accessory will also shorten your recycling times.
Built-In 2.4 GHz Receiver
The CITI400 Pro can be controlled with full TTL, HSS, and remote manual power control with the PIXAPRO PRO ST-IV or ST-III transmitters (To get the most out of your CITI400 we recommend the ST-IV Trigger).
Never miss a key moment with The One System
The One System allows you to communicate with our PIXAPRO flash's built-in receivers and control them all from one trigger. The 2.4GHz trigger system will give you full functionality, compatible with Canon, Nikon, Sony, Fuji, Olympus & Pentax with full control and even high-end cameras from Hasselblad, Leica and PhaseOne with basic control.
The PIXAPRO® CITI400 PRO is a simple, easy-to-use battery-powered unit that offers many features suitable for both amateur and professional photographers. Due to the battery power and TTL feature, it is the perfect light to give crisp sharp images whilst boasting super-fast recycle times and flash duration to capture motion for use in the studio or on location. This compact and lightweight flash are perfect for people who shoot Weddings, Portraits, Events, Fashion, Sports, and Advertising. It is especially good for shooting on location due to the flash being easily portable with automatic TTL metering.
Please Note: PiXAPRO Flash and Triggering Systems are fully compatible with Godox 2.4GHz Triggers, which will allow you to mix both Godox and PiXAPRO Equipment together without issue.
Specifications
Max Power400WsGuide Number71m @ ISO100 with Standard ReflectorColour Temperature5600 ± 75kFlash Duration1/240s - 1/12,820s (T0.1)Recycle Times0.01 – 1 Second Recycle TimeManual Flash Power Range1/1 - 1/256 (1/10 Stop Increments)Power SourceBuilt in (removable) 21.6v/2600mAh Lithium-ion BatteryNumber of FlashesApprox. 390 Full Powered Flashes Per ChargeLED Modelling Bulb Output30WBattery Recharge TimeApprox. 2 hours to fully charge from empty.Flash ModesTTL (Canon, Nikon Sony, Olympus, Panasonic, Fujifilm) / M / MultiHigh Speed SyncUp to 1/8,000sFlash Exposure Bracketing / Flash Exposure Compensation±3 Stops (1/3 Stop Increments)Flash Exposure LockYesRadio Frequency2.4GHz (Compatible with PIXAPRO One System)Radio Slave ModesCanon, Nikon Sony, Olympus, Panasonic, Fujifilm TTL Radio Slave ModesWork Range80m with ST-III Transmitter in Open AreaChannels (Radio)32Channels (Optical)4Groups3 (A/B/C)Slave ModesManual Slave Modes S1 & S2Other Trigger MethodsPC Sync Port, 3.5mm Sync port, USB port for Pro AC Trigger Set (Manual Flash Support Only)Dimensions220mm x 102mm x 128mmNet. Weight2.1kgAccessory MountGodox / Bowens S-Type
